Craft, Home Interior, Art and Design

This is a paint capable of withstanding even in areas where synthetic enamel oxidized not join or already be too late to apply a Rust. Their treatment is the same as the Rust. Only a hand applied before glazing. We can find different colors to avoid excessive enamel hands to coat. Something essential before applying a converter is removed from the surface and loose parts as much rust as possible using the knife and sandpaper.

There are also other materials such as flux, which is an acid that removes the rust of metals. Following the application with a brush, rinsed with water and after 24 hours can be painted with the converter, or Rust.

If you enjoyed this post, make sure you subscribe to my RSS feed!

Chandeliers, lamps, furniture legs, knobs or metal object can be coated with a varnish or lacquer that specially for these materials, which will create a protective film, preventing corrosion but keeping it the metallic look that they had processed objects. This is because the metal coatings are colorless and usually dull, or opaque. This is a very good chance to protect metal parts from rust. There are even paints that can be applied over rusty surfaces, not allowing further deterioration, but kept intact the texture and hardiness.

Recommendations for use
If you want to highlight the metallic sheen of other materials such as copper, bronze, steel and silver, you can use a rust remover, then rinsing and polishing, apply the varnish. It is not advisable to use objects in constant contact with the water and are affected by the presence of heat.

Can be replaced with wood varnish?
No, the metal coating cannot be replaced by wood varnish. Generally the latter yellow and flake on metal surfaces, also contains exclusive oils for wood protection. The metal coating has a formula based on alkyd resins and anticorrosive agents that protects the metal especially.

If you enjoyed this post, make sure you subscribe to my RSS feed!